MAIN MENU

CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Rebar & Cover Meter Model CM9 CoverMaster ]
- [ Rebar Locator ]
- [ Rebar Locator and
Metal Probe ]
- [ Rebar Plus Rebar Locator ]

Rebar Plus Rebar Locator

Locate rebars quickly and accurately
Drilling through rebars can be dangerous and expensive, but trying to avoid them can be time-consuming.

Anybody working with reinforced concrete needs to know quickly and exactly where the rebars are to avoid cutting through load bearing rebars, leaving unsightly unnecessary holes, damaging the drill or weakening the reinforced structure.

Rebar Plus uses our unique technology to locate rebars or welded mesh fabric precisely and reliably, and since it is not affected by moisture, temperature changes or electrical interference, the Rebar Plus is extremely stable even under the most arduous site conditions.

Fast to use
The loud audible signal and a clear analogue meter enables you to scan quickly and accurately.

Easy to use
Only one control knob and two switches.

Rugged yet lightweight
Work all day without tiring.

Versatile
Although it was not designed as a cover meter, the Rebar Plus can also estimate the depth of cover. It can also be used with the Protovale Borehole Probe (see below) for location of tendon ducts or during the installation of discrete anodes.

 

CUT COSTS — NOT REBARS

Map out rebars; find "safe spots" before drilling
The narrow controlled search field of the Rebar Plus easily identifies vertical and horizontal bars allowing a safe spot to be marked prior to drilling even when used near metal window frames or scaffolding.

 

Rebar Plus: Technical Specification

  • Quality colour-coded meter scaled for the precise location of rebars; an indication of the depth of concrete cover; and the battery state
  • High-impact ABS control unit. Strong epoxy resin search head
  • Built in loud speaker for audible bar location
  • Headphone socket: 3.5 mm mono jack
  • Single on/off and sensitivity control knob
  • Control panel switch for moving between two ranges: low 1 to 8 cm and high 5 to 14 cm; and an indication of battery state
  • Control panel switch for audio tone
  • Easily accessible battery compartment
  • Strong leather case with shoulder strap
  • High grade TNC plug search head connector
  • Compatible with Protovale Borehole Probe and 6S search head
Detection ranges
(single bars)		 Resolution of parallel bars
8mm diameter 12cm 60mm pitch at up to 35mm cover
16mm diameter 14cm 75mm pitch at up to 50mm cover
32mm diameter 16cm 150mm pitch at up to 85mm cover

Welded fabric of 6mm bars on 200mm centres can be resolved at up to 120mm cover.

 

Kit includes

  • Control unit in leather case
  • 4S search head
  • User manual

Optional Extras

  • 6S search head increases detection range to 200mm for large bars.
  • Borehole Probe for locating tendons or deeper layers of bars.

 

DIMENSIONS
Control unit in case: 165 x 120 x 90 mm, 680g
Standard 4S search head: 108mm face diameter, 350g
Batteries: 4AA size (LR6) (not supplied) Mn1500 alkaline recommended, or NiCad can be used.
Total shipping weight including search head : 1.5kg
Optional 6S search head: 153mm face diameter, 170g
Bore hole Probe: 515mm long, 130g