CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Depth Reading Line
Tracer ]
- [ Frequency Digital Line
Tracer ]
- [ Pipe and cable Locator ]
- [ Metal Detector ]
- [ Rebar Locator and
Metal Probe ]

Features

• Pre-Set ground effect rejection
• Quick Tune - ready for operation in seconds
• Detects all metals
• Accurately pinpoints rebars
• Fully submersible search loop
• VLF with synchro-detection (Pre-Set)
• Destects intersections of rebar or mesh
• Visual and audio indications
• Rugged construction
  Operates on universally available batteries

Fisher's Model 100 Metal Probe represents the most advanced state-of-the-art instrument employed for precisely locating metal objects in non-metallic structures. Very Low Frequency (VLF) operation combined with Synchro-Detection provides ultra sensitivity and maximum penetration.

Advantages of the Model 100 are savings in time, money, material, equipment and manpower. Ease of operation is matched by ease of learning, lightweight portability, and the ability to precisely locate and define metal objects even in two-inch rebar mesh. Operation is learned in minutes by personnel of all skill levels.

Applications
The Model 100 can locate reinforcing bar, conduit pipes, PK nails, wiring, wall studs or anything metallic.

Ground effect rejection
Pre-Set Synchro-Detection circuit eliminates Ground Effects caused by highly mineralized materials and false signals due to loop swing.

Audio and visual detection
Wide view meter permits precise adjustment of penetration and definition of the metal target; precise determination of intersections and mesh. The powerful loud speaker indicates location of the target by emitting a strong, clear signal that can be adjusted to a confortable level with the volume control. A headphone jack permits use of an optional headset.

Quick-Tune
Turn the instrument on and only the Penetration control need be adjusted for most operations, allowing maximum penetration and precision in seconds.

Construction
Rugged, Solid-State construction and lightweight, compact design result in optimum reliability and ease of operation. Housed in extruded aluminum, and weighing only 3.4 pounds, the M-100 incorporates a miniaturized 3.5-inch Isocon search head that is fully waterproof.

Accuracy
Accurate to within 1/4" to the longitudinal center.

5-year limited gold seal warranty
Fisher warrants the M-100 to be free of detects in materials and workmanship when it is shipped from the factory. The terms of this warranty are fully explained in a warranty registration card that accompanies the intrument. Complete filed and factory service facilities support the warranty.

Specifications

• Operating frequency of loop: 4.5 kHz
• Sensitivity: 0.2mV RMS for full scale
• Sensitivity adjustment range: 12:1
• Output indication: Meter-1 Milliamp, 0-100
  Linear scale
  Speaker-16 Ohm impedance
  Headset-16 Ohm impedance
  (optional)
• Audio frequency: 450 Hz
• Power supply: ±9V, each consists of 6 x 1.5V AA batteries (12 batteries total) Alternate: 2 x 9V NEDA 1604 (W/Reduced battery life)
• Power consumption: (-9V) 13.8mA, (+9V) 4mA minimum 10mA sound threshold, 112mA maximum sound
• Search loop configuration: double D
• Weight: 3.4 pounds
• Dimensions: 5 1/4 x 4 3/4 x 23" on the handle,
  5 1/4 x 4 3/4 x 8 1/4" off the handle
• Shipping weight: 5 pounds
• Shippind dimensions: 5 1/2 c 11 1/2 x 25"