Process Signal Logger - SmartReader 7

MAIN MENU

Process Signal Logger - SmartReader 7

Smart Reader 7 is a versatile data logger designed for easy recording of common process signal variables. With seven input channels, the logger is ideal for monitoring (through external commercially-available transducer) a wide variety of measurement parameters including temperature, humidity, pressure, wind speed, current, voltage, power, and much more.

Specifications :

No. of Channel : Eight (one internal, for ambient temperature and seven external for analog voltage and current loop signals).
Ranges : Voltage and current inputs
Standard Ranges :
- 0 to 2.5 volts D.C.
- 0 to 5.0 volts D.C. (two channels)
- 0 to 10.0 volts D.C.
- 0 to 200 millivolts D.C.
- 0 to 25 milliamps volts D.C. (two channels)
Accuracy : ±1% full scale
Maximum Voltage : ±40 volts (reverse-polarity protected)

Common Specifications :

Size : 107 x 74 x 22 mm (4.2" x 2.9" x 0.9")
Weight : 110 grams (5 ounces)
Case Material : Noryl Plastic
Operating Limits : -45°C to 70°C (-50°F to 160°F) and 0 to 95% Relative Humidity (non-condensing)
Clock-Accuracy : +/-8 seconds per day plus one sampling interval
Battery : 3.6 volt Lithium, 1 Amp-Hour
Power Consumption : 5 to 10 microamps (continuous)
Battery Life : Ten years (Factory Replaceable)
External Connector : Removable screw-type terminal strip with Common (-) connection
Memory Size : 32,768 readings
Sampling Methods :
1. Continuous (First-in, First-out)
2. Stop when full (Fill-then-stop)
Sampling Rates : User selectable rates from every 8 seconds to once a week
Resolution : 8 bits (1 part in 256)
PC Hardware Requirements : IBM PC or 100% compatible with: at least one serial port; an IBM CGS, EGA, HGA, VGA, or other adapter capable of emulating thses standards
Software Requirements :
1. TrendReader for DOS-MS DOS version 3.0 or later and at least 512 K of RA memory. TrendReader for DOS supports a wide range of printers and plotters.
2. TrendReader for Windows-Windos version 3.1 or later already running with at least 2MB of RAM memory and 2MB of hard drive disk space
Product Approvals : Meets Class A radiated and conducted emission requirements of Section 2 of the Radio Interference Regulations of Communications Canada and of Part 15 for Digital Devices of the Code of Federal Regulations of the Federal Communications Commission (FCC).
Resistance to X-Rays : Tested for protection against a 160kV dose @ 5mA for 30 seconds (150mA-sec) @ 38 inches F.F.D. (about 100 times that of an airport X-Ray machine). Tested for protection against Gamma Ray (equivalent to 0.1337 - 1.38 mega volts) IR 192 - 28 curies @ 30 second exposure source to object distance 5"

Internal Temperature Sensor (common on all models):

Type : Negative Temperature Coefficient Thermistor
R25 Value : 10,000 ohms
Tolerance (sensor only) : +/-0.2°C, over the range of 0 to 70°C (+/-0.3°F, over the range of 32 to 158°F).
Range : -40 to 70°C (-40 to 158°F)
Resolution : 0.4°C (0.7°F). Better than 1°C (1.8°F) between -25°C (-13°F) and 70°C (158°F). Better than 2.0°C (3.6°F) between -40°C (-40°F) and -25°C (-13°F).

CAT. NO. _	DESCRIPTION _
ACRSR007-0.......	Process Signal Logger
ACRTRSFW-0....	TrendReader software with IC-100 cable