CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more inf o:
JSi@jsits.com

- [ Price Type AA
Current Meter ]
- [ Pygmy Current Meter ]
- [ Electronic Flowmeter
and Readout ]
- [ Mechanical Flowmeters
/ Model 2030 series ]
- [ Open Channel / Sewer Flowmeter PCM3 ]
- [ Open Stream Current
Velocity Meter ]
- [ Salinomadd Salt Wave
Flowmeter ]

The model 2030 series Digital, Mechanical Flowmeter is a compact, general purpose instrument for flow measurements in rivers, estuaries, canals, sewage outfalls, and offshore applications. It is ideal for determining water speed, volume, or distance. The Flowmeter incorporates a precision molded rotor coupled directly to a six digit counter which registers each revolution of the rotor and displays it in a fashion similar to that of an odometer. The counter is located within the body of the instrument and is displayed through the clear plastic housing. Corrosion-Free operation Ballasted for dynamic in situ stability Unlimited depth capability Dimensions : 21.3 cm (8 3/8") overall length. Standard rotor diameter : 6.98 cm (2 3/4"). Low-speed rotor diameter : 16.5 cm (6 1/2").

Your Choice of Impellers :

• Standard Impeller : For use in oceans, rivers, canals, open channels or with towed nets. Measures current speeds from 10 cm/sec through 790 cm/sec. Comes with 6-digit counter that measures 999999 counts which is equal to approximately 14.5 nautical miles. 3½" diameter plastic impeller.
• Low Speed Impeller : Same as standard, except features a 7" wide two-blade gray impeller that has more surface area so it senses slower currents. Measures currents from 2 cm/sec to 100 cm/sec. Designed for use in water that appears to be stagnant or along dams. Available with either 6 digit counter which measures 999999 counts which is equal to approximately 14.5 nautical miles or 7 digit counter where 9999999 is equal to approximately 145 nautical miles. (Mechanical version only)
  Replacement Low Speed Impeller converts standard Flowmeter to low speed.
• Extendible Wading Rod : 3 ft. aluminum rod extends to 8 ft. to measure currents from river banks, bridges or any areas where it is difficult to reach. Connects directly to Flowmeter by the stainless steel axle pin. Unit has three 3-ft. aluminum sections.