CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Bench Ovens ]
- [ Economical Forced
Convected Ovens ]
- [ Heavy Duty Oven ]
- [ Hybridization Oven
Model 1012 ]
- [ High-performance
bench-top ovens ]
- [ Laboratory Ovens ]
- [ NCAT Moisture
Determination Oven ]
- [ Oven-logger ]
- [ Vacuum Oven ]
- [ Vacuum Oven / Station ]
- [ Rolling Thin Film
Oven ]

• Low Profile
• Large Capacity Carousel: 12/300mm or 24/75mm bottles
• TEFLON coated bottle clips
• Microprocessor temperature control
• Independent overtemperature (OTP) control
• Rapid heat up: Ambient to 65°C in only 7 minutes
• Variable speed control; 0.15rpm
• Incremental jogging switch
• CAM ACTION door latch
• Drip tray included

Hybridization ovens are fast becoming the preferred method of hybridization technique in today's laboratory. The ovens have virtually replaced plastic bags and shaking water baths because of the added safety and convenience they provide. Incubations take place inside the oven, under constant rotation, thereby providing even distribution of probe solution over the membrane. Exposure to radiation from leaking bags and the general inconvenience of loading and unloading bags is eliminated.

The hybridization oven offers high performance with precise temperature control, safety, and convenience. Our narrow frontal profile provides the added benefit of conserving precious benchtop space, while still allowing for the convenience of a twelve bottle (300mm) capacity carousel. In addition to the large capacity carousel, the Model 1012 incorporates TEFLON coated bottle clips for easy bottle placemennt and removal. The Teflon also prevents inadvertent scratching of the bottles.

A variable speed control optimizes the speed of rotation for a particular probe. The 0-15 RPM range permits hybridization and washing at different speeds of ratation at the touch of a dial. A separate jogging switch has been included to allow you to incrementally rotate (JOG) the carousel for easy loading and unloading.

The hybridization oven offers exceptionally high performance. You no longer need to wait twenty to forty minutes to reach target temperature. The Model 1012 heats from ambient to 65°C in only seven minutes. And, our unique fan assisted airflow system circulates air evenly and continuously, delivering excellent temperature uniformity throughout the oven chamber.

The digital set/digital read P.I.D. microprocessor temperature controller maximizes rapid heat-up of the oven. In the unlikely event of a microprocessor failure, a thermal cutoff will shut off the power to the heating elements.

Also available from GENEQ:
Glass Hybridization bottles with gasketed, leak-proof caps.

Specifications

• Carousel Capacity: 12 x 300mm or 24 x 75mm bottles
• Temperature Range: Ambient +5° to 80°C
• Overtemperature (OTP) Safety: YES (Automatic. 1.0°C above setpoint)
• Safety (OTP) cutoff: YES (THERMAL CUTOFF preset at factory: 82°C)
• Temperature Precision: 0.1°C
• Temperature Uniformity: ±0.25°C
• Temperature Display: LED, 3 digit
• Temperature Ramp: Ambient to 65°C in 7 minutes
• Rotator: Variable Speed 0-15 rpm
• Interior Dimension HDW: 13.375 x 12.875 x 13.25 inches (340 x 327 x 336 mm)
• Exterior Dimension HDW: 20 x 21.25 x 17 inches (508 x 540 x 432 mm)
• Power: 750 Watts 220/240V - 50/60Hz
  or 110/120V - 50/60Hz
• Net Weight: 74 lbs. / 33.5 kilos