MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
- [ External Temperature
/
Humidity Sensor ]
- [ Heavy Duty
Moisture
Meter ]
- [ Humidity
- Temperature
Data logger
HygroLog ]
- [ Humidity-Temperature
Indicating
Probes ]
- [ Humidity
- Temperature
Indicator
A1H ]
- [
Humidity
Temperature
Meteorological Probe
-
MP101A
]
-[ Humidity
Temperature
Meteorological
Probe ]
- [ Humidity &
Temperature Meter ]
- [ Humidity
- Temperature
Transmitters
Calibration
Free FH
Series ]
- [ Leaf Wetness Sensor
]
- [ Portable
Humidity Temperature Indicator - HygroPalm ]
- [ Relative
Humidity
Sensor ]
- [ Temperature
Humidity
Dew Point ]
- [ TH-Calc
Temperature
and Humidity
Meters ]
Simple to operate and versatile, the A1H combines
advanced probe technology with a robust design
- Digital HygroClip plug-in probe uses accurate, highly stable and durable sensors
- Measuring range: 0... 100%RH and -10...60°C/14..140°F (-40...85°C/-40...185°F with probe extension cable)
- Swivel probe base provides for optimum viewing angle of the LC display
- HOLD fonction facilitates measurements in hard-to-reach places
- Auto-power-off conserves battery power
- Operates with 9V alkaline battery or with AC adapter
- Optional HW3 software permits direct data logging/graphing on a PC or Laptop, data conversions and field calibration of the HygroClip probe
- Analog voltage outputs for use with a recorder or printer
- Fully interchangeable HygroClip is replaced in seconds with no loss of accuracy and no calibration
| Technical data | |
| Plug-in probe | HygroClip S (included) |
| Humidity sensor | ROTRONIC HYGROMER C94 (capacitive) |
| Temperature sensor | RTD Pt100 Ohm, 1/3 DIN |
| Sensor protection | Wire mesh filter (standard) / foam filter (optional) |
| HygroClip operating/measuring range | 0...100%RH |
| -10...60°C (14..140°F) Plugged directly to A1H | |
| -40...85°C (-40...185°F) with probe extension cable | |
| A1H operating limits | 0...95%RH and -10...60°C (14...140°F) |
| Temperature unit (display) | °C or °F (specify when ordering) |
| Accuracy at 23°C / 73°F | <±1.5%RH and ±0.2°C / 0.4°F |
| Repeatability | Better than 0.5%RH and 0.1°C / 0.2°F |
| Resolution | 0.1%RH and 0.1°C or °F |
| Functions | Hold, auto-power-off (afetr 2 min), battery status |
| Display | LC Dual |
| Digital Output | RS232 |
| Analog Output | 0...1V=0...100%RH and -0.4...0.85V=-40...85°C |
| Battery | 9V alkaline |
| Current Consumption | 5 mA / 11mA when connected to a PC (RS232) |
| Case material (A1H) | ABS, gray |
| Case dimensions (A1H) | 190 x 63 x 26 mm (7.48 x2.48 x 1.02") |
| Probe material | ABS |
| Probe dimensions | Ø 15 x 160 mm (0.59 x 6.30" (HygroClip Ø 15 x 87 mm [0.59 x 3.43"]) |
| Weight with HygroClip | 240g (0.53 lb) |
| Options and accessories | |
| A1H-Set (specify °C or °F when ordering) | Includes A1H, HygroClip S, carrying case, Hygrodata-A1H, ER-15 calibration device and one box of 5 EA50 (50%RH) certified standards |
| HygroClip R | Replacement HygroClip (HygroClip Exchange Program) |
| AC1207 | 115 VAC adapter |
| Hygrodata-A1H | HW3 software and data cable |
| ET-86.1808.0501 | Printer / recorder cable for analog outputs |
| MOK-02-DAT05 | Extension cable 2m / 6.5 ft for HygroClip and A1H (5m / 16 ft) on request |
| HPH-CG-XX-DAT05 | Extension cable with built-in amplifier for HygroClip and A1H XX=0...99m (maximum 320 ft) |
| ER-15 | Calibration device for the HygroClip |
| EAXX-SCS | Certified Humidity
standards (5 per box) XX = 00, 05, 10, 20, 35, 50, 65, 80, 95% RH |
HW3 Software
The HW3 software is used to record data from the A1H to a PC or Laptop. The data can be displayed as a table or as a graph. If so desired, HW3 can also be used to calibrate the HygroClip. Requirements: Pentium 95 Mhz or better, Windows 95/98 or NT, 20 MB free space, 600x800 color monitor, one free COM port.