Humidity-Temperature Data Logger

Humidity-Temperature Data Logger - HygroLog

Advanced sensor technology with microprocessor and ASIC provides accuracy better than Ąž1.5%RH and Ąž0.3ĄĆC
Fully programmable with alarm function
Memory capacity of 5,000 humidity-temperature data points
Up to one year operation without battery replacement
Powerful, user friendly Windows based software
Probe can be separated from electronics for measurements in the range of -40...85ĄĆ (-40...185ĄĆF)
HygroClip plug-in probe is supported by our worldwide exchange program and is quickly replaced with no loss of accuracy and no calibration

Technical data
	HygroLog	HygroLog-D
Plug-in probe	HygroClip S (included)
Humidity sensor	ROTRONIC HYGROMER C94 (capacitive)
Temperature sensor	Pt100 1/3 DIN RTD
Operating Range - Logger	0...100% RH -10...50ĄĆC with alkaline batteries -20...70ĄĆC with lithium batteries	0...100% RH -10...50ĄĆC (limited by LC display)
Accuracy at 23ĄĆC	Better than Ąž1.5% and Ąž1.5%RH and Ąž0.2ĄĆC / Ąž0.4ĄĆF
Repeatability	<0.5%RH and 0.1ĄĆC
Memory	5,000 x humidity and temperature data points
Log Internal	15 sec to 120 min
Batteries	3 x 1.5 V
Battery life (5min. log interval)	about 1 year	about 6 months
External Power	8...20 VDC (requires HYGROLOG-IPH holder and AC adapter)
PC requirements	Microsoft Windows 95/98 or NT, MSIE 4.0 Browser or higer 90 MHz Pentium, 32 MB RAM, VGA monitor 800x600, 256 colors or higher
Case material	ABS
Protection Grade	IP65
Dimensions	140 x 85 x 25 mm (5.51 x 3.35 x 0.98")
Weight	200g (0.44 lb)

Software and programming

Continuous (Loop) recording:
data recording begins as soon as the HygroClip is plugged in. When the memory is full, the oldest data is erased as new data is added.

Star/Stop Recording:
data recording begins at a specific times and ends when the memory is full.

Alarm values:
alarms values can be programmed and shown on a chart. The display of the HygroLog-D provides an indication when any alarm value has been exceeded.

HW3 Software:
the HW3 software is used to program and read the Hygrolog. The data can be displayed as a table or as a graph. If so desired, HW3 can also be used to calibrate the HygroClip.

Accessories
HYGRODATA-HL	HW3 software and data cable
HYGROLOG-IPH	Wall-mount holder, can be used with or without AC adapter
HYGROLOG-SP	Shock protection for HygroLog/D
MOK-xx-DAT05	Extension cable for the HygroClip xx = 01 (1m/3ft) or 02 (2m/6ft) or 05 (5m/15ft maximum length)
HYGROCLIP-R	Replacement plug-in probe 100% interchangeable without calibration
ER-15	Calibration device for HygroCLip
EAxx-SCS	Certified humidity standards )box of 5) xx = 0, 5, 10, 20, 35, 50, 65, 80, 95%RH
MOK-02-WIN	Calibratioj cable for HygroClip (plugs into the COM port of a PC)