CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ Automatic Film Applicators ]
- [ CHLOR*TEST™ Salt
Detection Kit ]
- [ Cross Hatch Cutter ]
- [ Elcometer 456 ]
- [ Gloss Meter Novo-Curve ]
- [ Hiding Power Meter ]
- [ Novo-Gloss ]
- [ Novo-Haze Haze meter ]
- [ Novo-Shade 45/0 Reflectometer ]
- [ Oven-logger ]
- [ Paint Inspection Gage ]
- [ Powder Thickness Gauge (non-contact) Model 550 ]
- [ Statistical Novo-Gloss ]
- [ Surface Preparation ]
- [ Testex Tape &
Thickness Gauge ]
- [ Traceable Thickness
Standards
- [ Ultrasonic coating thickness
gauge ]
- [ Wet film hiding power meter ]
- [ Wet Film Thickness
Measurement ]

Need
To prevent premature coating failure it is imperative to remove chloride salts from the surface before any coating process.

Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion of the product before the full life of the coating has been achieved.

Chloride ion testing can now be achieved quickly and accurately using a novel extraction method based on the CHLOR*EXTRAC™ solution.

Technique
The Elcometer 134 is an easy to use test kit, for even the most difficult access areas.

Using the revolutionary new chloride extraction solution CHLOR*EXTRACT™ a representative sample is obtained in a few minutes. This sample is tested on site using a simple titration tube. It is so easy to get accurate results that even an inexperienced operator can do it.

The whole test takes less than five minutes from start to finish.

Features

• Mercury free testing
• Simple, quick, accurate measurements with highly efficient slat extraction
• No hypodermic needles or syringes
• Ideal for rough surfaces
• No complex reagents or deionised water
• No laboratory testing of samples
• No temperature compensation
• Fully portable and easy to use

Typical applications

• Bridges
• Marine structures
• Power plants
• Ships
• Aircraft
• Storage tanks
• Offshore rigs
• Pipe lines
• Mining facilities
• Cooling towers
• Petrochemical plants
• Steel fabrication

A testing process as easy as 1 - 2 - 3

Specifications

• Operating temperature range (without temperature compensation): 5 - 80°C (41 - 176°F)
• Titration tube range: 5 - 200 ppm (5 - 200µg/cm²)
• Resolution: 1 ppm
• Colour change: pink - white
• Storage conditions (in a cool dark place): Not exceeding 25°C (77°F)
• Box dimensions: 185x125x110mm (7x5x4.5 in.)
• Kit weight: 250g (0.55 lb)

Part Number: E134----1
shipping list: 5 tests in box (Each test contains a bottle of CHLOR*EXTRACT™, test sleeve and titration tube)