CATALOG INDEX
BY ALPHABETICAL
ORDER

CATALOG INDEX
BY DEPARTMENT

For more info:
JSi@jsits.com

- [ PCB/Chloride Analyzer
Model L2000 ]
- [ Test Kit Water content
in Oil-Hydroscout ]

Hydroscout
USEPA SW-846 DRAFT METHOD 9001

Hydroscout is a field portable test that quantifies water concentration in a variety of matricies, (oil, paint, solvents, liquid waste, soil, inks, etc.). Hydroscout can quantify water content in two ranges, 0 to 20% and 0 to 100%. It is an easy, inexpensive test that can be run in the field at the pickup point or in a laboratory setting with minimal training required. This method is ideal for accurately determining the true water content in used oil before acceptance or treatment.
Hydroscout has been assigned a USEPA SW-846 Draft Method 9001.

Hydroscout Meter
The palm-sized Hydroscout meter is programmed to determine water content over two common ranges. "Program A" covering the range 0-200% can determine water content down to 0.15% (1500ppm), v/v. Using the available dilution vials, "Program B" can  measure water content up to 100%, Results are displayed in volume percent on an LCD.

The meter is menu driven for ease of use. Both programs auto-calibrate and perform quality control checks to minimize false negatives and ensure accuracy.

Reagents
0 to 20%
All of the reagents are premeasured and sealed in glass ampules for safe, accurate and consistent results. Results are obtained in 2 minutes utilizing only a sampling syringe, one test tube and one breakable ampule. Each test comes with a disposal ampule that allows easy disposal of used tests in normal waste. The tests come packaged in 40 tests per box.

10 to 100%
Testing the water content of oil from 10 to 100% requires one additional step using a premeasured dilution vial. Dilution vials are available in separatey packaged units of 12 vials per box.