All of these
meters connect directly to your computer’s serial port and the meters’
readings will be simultaneously shown on analog, digital, and chart
recorder displays. The software automatically recognizes the type of meter
it is receiving data from, and continuously scales all graphs and analog
read-outs. There are separate displays for the main meter parameter and
for temperature. Additional displays continuously update min and max
readings for both parameters, and real time. The user can choose the
duration of the test, number and frequency of samples, number of X axis
points on the graph and set audible hi/lo alarms. Data points are logged
to a file for later analysis and hard copies of the graphs can be printed
out immediately.
To connect meters directly to a
computers RS232 port, a cable is necessary and sold separately. Please
see the guide below for help in choosing the correct cable for each
meter.