Whole Grain Analyzer - portable
Portable, accurate, state-of-the-art technology
The
ZX-50 Whole Grain Analyzer was developed to provide today's farmer
with a completely portable, state-of-the-art tool for analyzing
grain protein, moisture, and oil concentration critical to the profitability
of each harvest.
Highly accurate near-infrared spectroscopy delivers grain analysis where you need it most, when you need it most -- to separate harvests from different fields for highest return at the grain elevator.
The ZX-50 has been specially designed for rugged in-the-field use and can be operated without problem on the combine, tractor, pickup or while walking around the field. The ZX-50's total solid state design uses no motors, no gears, no light bulbs or other mechanical devices that are failure prone. An optional aluminum carrying case allows the ZX-50 and all accessories to be quickly and easily transported from one location to another.
The ZX-50 displays protein and oil both on an As-IS basis and a Constant Moisture (CM) basis. With the optional printer, all results can be printed out including time and date of the test.
Simple, easy to use operation
The ZX-50 requires no special skills to operate. Simply pour the whole grain to be analyzed into the ZX-50's sample holder and place it into the analyzer. No special sample preparation is needed and the integrity of the sample is maintained with no waste or chemical by-products.
Once activated, the ZX-50 quickly measures the grain's protein, moisture, and oil concentrations and displays them on the analyzer's built-in LCD display in less than a minute.
Specifications |
|
Function |
|
Field analysis of whole grain for protein, moisture, oil, and other constituents. |
|
Available options |
|
Data analysis software |
Full calibration software |
Additional calibrations |
Up to eight (8) with three (3) constituents each |
Printer |
mates directly to ZX-50 or can be linked by cable; provides hard copy for time, date, sample number, moisture, oil, and protein analysis |
Additional sample cup |
Required for some grains |
Carrying case |
Aluminum; holds ZX-50, sample holder, and accessories |
Optical capabilities |
|
Spectrum range |
12 filter covering wavelengths from 893 to 1045 nm (standard) |
Scan speed |
Up to 10 scan per secoond |
Optical range |
0 to 6 AU |
Resolution |
0.0001 AU |
Stability |
0.05 Mili-AU |
Measurement modes |
Diffuse transmittance |
Measurement time |
Variable (typically under 1 minute) |
Measurement data |
Log 1/T value; 12 primary wavelengths |
Sample Information |
|
Sample size |
10- grams approx. |
Sample holder |
Adjustable, reusable 5-30 mm cuvette for different grain sizes |
Sample preparation |
None required |
Sample destruction |
None |
Measurement range |
From 1.0% to 95% |
Physical data |
|
Dimensions |
10.5x4.75x3 in. (26x12x9cm) |
Weight |
3 lbs (1.5 kg) |
Installation data |
|
Power requirements |
Batteries: (6) alkaline 1.5V "AA", AC/DC Adaptor: 120 to 240 VAC, 50/60Hz |
Power consumption |
750 mw |
System capabilities |
|
Data transfer |
Via RS-232 port for interface with PC |
Results |
Approaches lab accuracy when calibrated to official laboratory tested samples |
Calibrations |
Standard HRS wheat and oone additional grain. Capacity to store ten (10) calibrations |
Temperature compenssation |
Built-in: Instrument 5¡Æ- 45¡ÆC (45¡Æ- 110¡ÆF) Sample -10¡Æ- 45¡ÆC (20 - 110¡ÆF) |
Outputs |
LCD display, optional printer |