MAIN MENU
CATALOG INDEX
BY ALPHABETICAL
ORDER
For more info:
JSi@jsits.com
Simultaneous infusion and withdrawal with opposing syringes on a single drive. As one set of syringes infuses, the other withdraws at the same rate.
- Holds up to four syringes, 10 µL to 60 mL each for push-pull, or two syringes for one direction only.
- Backlit LCD display
- Knob locks/unlocks drive block for effortless, drag-free adjustment
- Simple menu-driven setup: Syringe diameter (selected from displayed table), Dispense volume, Dispense flow rate
- Continuous dispense volume display
- Preset volume control and automatic shutoff
- Settings can be reviewed or changed during operation
- Optical encoder stall detection
- Choice of unit selection
- Last settings stored in permanent memory
- Built-in RS-232C interface for computer linkiing or "daisy chaining" up to 100 pumps.
- TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control
| SPECIFICATIONS | |
| Mode | Infusion / Withdrawal |
| Syringe Size | 10 µL to 140 mL (four) |
| Maximum Flow Rate (60 mL Syringe) |
147 mL/min |
| Minimum Flow Rate | 0.001 µL/hr |
| Linear Force | 40 lb (18 kg) |
| Advance Per Microstep | 0.165 micron |
| Maximum Step Rate | 1600 steps/sec |
| Minimum Step Rate | 1 step/30sec |
| Accuracy | < 1% error |
| Reproducibility | ± 0.1% |
| Dimensions | 11 x 9 x 5.5
in. 28 x 23 x 14 cm |
| Shipping Weight | 12 lb (5.4 kg) |
Optional keypad programmable feature KDS 260 P
Also available 95-135V or 220-240V, 50/60Hz